Reply to topic  [ 106 posts ]  Go to page Previous  1, 2, 3, 4, 5 ... 8  Next
 What is the NRA, as currently a Gun Use Rights Lobbyist? 
Author Message
Level 20
Level 20
User avatar

Cash on hand:
-1,297,212.95

Bank:
0.00
Posts: 2126
Joined: Sun Mar 19, 2017 6:11 am
Location: PEARL HARB☠R!!! QUELL (PRETENSE OF) INSTIGATIONS (WARMONGERING), USURPATION, AND COUPS!
Group: Registered users
Post Re: What is the NRA, as currently a Gun Use Rights Lobbyist?
Fuck, it's a bit hard installing/uninstalling the filler screw parts. Steel grinding! I scraped some paint and shit. Good thing there's the solvent and lubricant to make clean and look new! Plus, I think I have to tune the alignment if I wanted the screws to help line up shit, if it should do anything. I don't give a shit about that, as it will require astronomical know-how in precision tuning, which might cost several purchases due to being prone to mistakes and all.

I also tried punching the roll pins that slip out at times. Took some sensitivity and effort, but I did it.

Well, I guess I could reread/view some instructions and safety stuff before I scrub and wipe down later.

_________________
_
https://www.youtube.com/watch?v=IoFD-c740Y0, Must be the_washington_times/moonie anthem
link <- this as well!
https://en.wikipedia.org/wiki/File:ChoSh.jpg, resident alien generation? Wow!
_
Regurgitator monster to be resumed
whatissk/moonie/washingtontimes=anti-armistice nazi instigator-usurper/tyherantno parasite/censorship/anti-neutrality embargo/siege fallen cheonson-ilminismist/ilminazmist/merciless 'they live' mein kampf machine/kal_flight_007 self-victimization
nsfw
Spoiler: show
Fraud Alert Renewal Month: 03, 06, 09, and 12
My ZDoom mods
Viva Le Resistance! (threat: see ☠Image☠ below...)
Metal tracking mods
sfw
Spoiler: show
https://archive.org/download/for_jihad_monsters/Lightning%20Exclusive%20Nasheed%20By%20Ahmad%20Al-Muqit.mp3


Mon Oct 05, 2020 10:09 pm
Profile WWW
Level 20
Level 20
User avatar

Cash on hand:
-1,297,212.95

Bank:
0.00
Posts: 2126
Joined: Sun Mar 19, 2017 6:11 am
Location: PEARL HARB☠R!!! QUELL (PRETENSE OF) INSTIGATIONS (WARMONGERING), USURPATION, AND COUPS!
Group: Registered users
Post Re: What is the NRA, as currently a Gun Use Rights Lobbyist?
I still need to read and maintain, plus voting with now a record on hardcopy (fuck, I think it happens all the time).

This flash post regards of the most annoying protest to bring back open carry. The case(s) resurface(s) once again.

The Mulford Act's intended purpose is to disarm the Black Panther Party before any violent engagement may happen. The risk to bring back open carry will depend on the moral compass between primarily good and evil acts, if not intentions/motives. How the compass or scale is decided depends on the matter of justification. The Africans says that they need to safeguard against the police, if not government tyranny. The Europeans says that they need to safeguard against the criminals, if not civil usurpation. Who can safeguard peace? Who can safeguard freedom? That, I wouldn't know.

As much as I like gun rights, I know it's still a risk to partake, considering how open carry policies can be abused. Like, you can, by chance, lose your sidearm by pickpocket! Or some muthafucka can go Scarface! Then again, the police can make fucking excuses to shoot at you, and their reason would be to call out on a life-threatening situation. Either ways, you're putting your trust in others (if not cops) to cover for you, should you fail to cover for yourself.

There's only one explanation that this act would be reversed, allowing a certain UNNAMED law to permit open carry in public. That explanation is the dire need to address a certain issue turbulent at these times. It must be the fucking countdown before the roving bandits of the depression begin their raids! Still, I don't know how open carry can protect at all. It's just like a warning show. What you gonna do? Go on patrol? Try convincing there's no criminal elements. I say, it's just a way to make some money. Or to try calming people's nerves down given the depression situation. Given the fact that things are to go downhill with either civic unrest or societal collapse, OPEN CARRY IS PROBABLY NORMAL DURING THE WILD WEST OR MEDIEVAL/FEUDAL AGES! THESE CARRY STUFF MAKES MORE SENSE IN SUCH SCENARIOS!

---

BOTTOM LINE IS THAT CURRENT LAWS STATE OPEN CARRY STILL/MAY REQUIRES OPEN CARRY PERMITS, LIKE HOW CONCEALED CARRY STILL REQUIRES CONCEALED CARRY PERMITS! GOOD LUCK WITH THE FUCKING RENEWALS, HAHAHA! xD

THE RIGHT TO BEAR ARMS IS SIMPLY THE RIGHT TO BEAR ARMS!

_________________
_
https://www.youtube.com/watch?v=IoFD-c740Y0, Must be the_washington_times/moonie anthem
link <- this as well!
https://en.wikipedia.org/wiki/File:ChoSh.jpg, resident alien generation? Wow!
_
Regurgitator monster to be resumed
whatissk/moonie/washingtontimes=anti-armistice nazi instigator-usurper/tyherantno parasite/censorship/anti-neutrality embargo/siege fallen cheonson-ilminismist/ilminazmist/merciless 'they live' mein kampf machine/kal_flight_007 self-victimization
nsfw
Spoiler: show
Fraud Alert Renewal Month: 03, 06, 09, and 12
My ZDoom mods
Viva Le Resistance! (threat: see ☠Image☠ below...)
Metal tracking mods
sfw
Spoiler: show
https://archive.org/download/for_jihad_monsters/Lightning%20Exclusive%20Nasheed%20By%20Ahmad%20Al-Muqit.mp3


Sun Oct 11, 2020 12:09 am
Profile WWW
Level 20
Level 20
User avatar

Cash on hand:
-1,297,212.95

Bank:
0.00
Posts: 2126
Joined: Sun Mar 19, 2017 6:11 am
Location: PEARL HARB☠R!!! QUELL (PRETENSE OF) INSTIGATIONS (WARMONGERING), USURPATION, AND COUPS!
Group: Registered users
Post Re: What is the NRA, as currently a Gun Use Rights Lobbyist?
While I get around gun maintenance (I haven't even done it, sheesh!), I will go over a new funny law that I browsed, lol.

So, for what are called assault ranged weapons, apparently, there's what you call a featureless grip requirement. It comes in many forms, one of them is a fin shape grip. They basically are ergonomics killers, so people don't practice competitive shooting for whatnot. Hey, I understand about the shooty shooty. I just don't think it might be the time to leave it sit. Times are changing, yeah, times are changing (sorry, Last Poets)! Here it comes!

_________________
_
https://www.youtube.com/watch?v=IoFD-c740Y0, Must be the_washington_times/moonie anthem
link <- this as well!
https://en.wikipedia.org/wiki/File:ChoSh.jpg, resident alien generation? Wow!
_
Regurgitator monster to be resumed
whatissk/moonie/washingtontimes=anti-armistice nazi instigator-usurper/tyherantno parasite/censorship/anti-neutrality embargo/siege fallen cheonson-ilminismist/ilminazmist/merciless 'they live' mein kampf machine/kal_flight_007 self-victimization
nsfw
Spoiler: show
Fraud Alert Renewal Month: 03, 06, 09, and 12
My ZDoom mods
Viva Le Resistance! (threat: see ☠Image☠ below...)
Metal tracking mods
sfw
Spoiler: show
https://archive.org/download/for_jihad_monsters/Lightning%20Exclusive%20Nasheed%20By%20Ahmad%20Al-Muqit.mp3


Mon Oct 12, 2020 11:28 pm
Profile WWW
Level 20
Level 20
User avatar

Cash on hand:
-1,297,212.95

Bank:
0.00
Posts: 2126
Joined: Sun Mar 19, 2017 6:11 am
Location: PEARL HARB☠R!!! QUELL (PRETENSE OF) INSTIGATIONS (WARMONGERING), USURPATION, AND COUPS!
Group: Registered users
Post Re: What is the NRA, as currently a Gun Use Rights Lobbyist?
Well, I gotten around at least on basic disassembly steps. Was just checking up on how my filler screws work. Never work on a wood surface as a disassembly/assembly environment, lol! Oh, and be soft and gentle on them roll pin areas. Even easier, punch roll pins out of the frame (if you ever have any problems punching out, I suggest to lay the frame on a wood block in side position [keep the cocking handle facing up to prevent as much damage as possible]), never ever punch roll pins in! Just use the plastic head (or non-marring) hammer to do the trick without damage to the steel. I made a fucking dent by this lazy mistake!

When I took (more like flip dropped) the bolt action, the cock handle and guide rod (spring) is a major spring strain to reel back in position to fit the reinserted bolt action. It's best to pull the cocking handle in the closest proximity to the rod/spring. Major delicate operation. Whew! Washing hands afterwards is necessary.

Up next, I'll probably read up on some steps in the cleaning process. Oh, I'm already thinking to buy another (ANOTHER?! YES, THAT RIGHT!) good. People usually say it's for a backup, but it's actually to accommodate the current regulations that have been popping up. This can also serve as a backup gun, depending how well it fares. Oh, the fluctuating waves of demand/supply curve. I'll see ya laters after getting through the reading/cleaning material. Until then!

_________________
_
https://www.youtube.com/watch?v=IoFD-c740Y0, Must be the_washington_times/moonie anthem
link <- this as well!
https://en.wikipedia.org/wiki/File:ChoSh.jpg, resident alien generation? Wow!
_
Regurgitator monster to be resumed
whatissk/moonie/washingtontimes=anti-armistice nazi instigator-usurper/tyherantno parasite/censorship/anti-neutrality embargo/siege fallen cheonson-ilminismist/ilminazmist/merciless 'they live' mein kampf machine/kal_flight_007 self-victimization
nsfw
Spoiler: show
Fraud Alert Renewal Month: 03, 06, 09, and 12
My ZDoom mods
Viva Le Resistance! (threat: see ☠Image☠ below...)
Metal tracking mods
sfw
Spoiler: show
https://archive.org/download/for_jihad_monsters/Lightning%20Exclusive%20Nasheed%20By%20Ahmad%20Al-Muqit.mp3


Sat Oct 17, 2020 12:52 am
Profile WWW
Level 20
Level 20
User avatar

Cash on hand:
-1,297,212.95

Bank:
0.00
Posts: 2126
Joined: Sun Mar 19, 2017 6:11 am
Location: PEARL HARB☠R!!! QUELL (PRETENSE OF) INSTIGATIONS (WARMONGERING), USURPATION, AND COUPS!
Group: Registered users
Post Re: What is the NRA, as currently a Gun Use Rights Lobbyist?
Them fucking mags. They good for readying ammunition for use, but I hate loading fucking mags. If you do it wrong, such as a loading the front mag plug into the front mag socket, but the back side may not load completely, the chambering operation is kaput.

This gives a slant, rather parallel alignment. No doubt that your bolt will not be able to chamber in your cartridge into the bore. A part of the mag guard may prevent the process to completion. In addition, the recoil spring might press onto the cartridge loads further in the mag, causing the mag mechanism to jam. Yes, jam! You have to use tools (not complicated though) to unjam.

If you want to load in a mag, you have to press and align on front and then back. No, sliding will not do. Pointed press (on corners [with their own respective pressing fingers]) method for good measure. Of course, a 3 finger press method might be even faster and easier. Still, the front and then back loading procedures/rules still apply. That's already 2 steps to load a mag. Fuck, if it was like for something serious, fuck. It's better to load the damn thing before. Scout motto said something about being prepared.

---

Oh, careful about pistol mags. If you press the ejection button by accident, the mag can slide right out. Fuck, fuck.

_________________
_
https://www.youtube.com/watch?v=IoFD-c740Y0, Must be the_washington_times/moonie anthem
link <- this as well!
https://en.wikipedia.org/wiki/File:ChoSh.jpg, resident alien generation? Wow!
_
Regurgitator monster to be resumed
whatissk/moonie/washingtontimes=anti-armistice nazi instigator-usurper/tyherantno parasite/censorship/anti-neutrality embargo/siege fallen cheonson-ilminismist/ilminazmist/merciless 'they live' mein kampf machine/kal_flight_007 self-victimization
nsfw
Spoiler: show
Fraud Alert Renewal Month: 03, 06, 09, and 12
My ZDoom mods
Viva Le Resistance! (threat: see ☠Image☠ below...)
Metal tracking mods
sfw
Spoiler: show
https://archive.org/download/for_jihad_monsters/Lightning%20Exclusive%20Nasheed%20By%20Ahmad%20Al-Muqit.mp3


Sun Oct 18, 2020 6:59 am
Profile WWW
Level 20
Level 20
User avatar

Cash on hand:
-1,297,212.95

Bank:
0.00
Posts: 2126
Joined: Sun Mar 19, 2017 6:11 am
Location: PEARL HARB☠R!!! QUELL (PRETENSE OF) INSTIGATIONS (WARMONGERING), USURPATION, AND COUPS!
Group: Registered users
Post Re: What is the NRA, as currently a Gun Use Rights Lobbyist?
Okay, I tried out the cleaning procedures. It was actually fairly easy given the instructions, but I think there's some mishap to address. You have to be at least somewhat smart about the steps before the cleaning becomes easy.

One, the cleaning mat is said to leave the wooly side on top. I have to diss against that. The wooly material can always leave behind some nasty wool after a good cleanup or lubrication. Who wants that now, huh? Just flip over to the plastic side on top, and no more wool contamination. If the frame or parts rip a fucking hole, let it. No wool is better than wool at all.

Now, the instructions mention to clean up the fucking bore (how, well, I rather use a bore snake instead of wasting money on disposable patches and steel cleaning rods that scrapes; you can try washing out the wet solvent and lubricant for reuse, but it's definitely disposable [caliber knowledge required]) before cleaning up the chamber/muzzle (with a bristle brush [brass/copper/non-stainless steel {haven't verify} for stainless steel {although, you can use non-stainless/stainless steel for carbon steel, but it will be hard to differentiate between steel types so I rather not try}, brass/copper for blued {painted, lol} steel, and probably nylon for non-steel? {since there are non-steel metals forged such as aluminum/copper/nickel/iron/zinc subsets, don't use the copper cleaner nor wipes, it corrodes!!!}; IMPORTANT! should you ever reached a situation where you must clean/protect a brasslite/nickel/wood material, you should just wipe it down with a dry clean soft cloth without any solvents or lubricants {yes, this is for the more fancy/classic wood/adornment stock stuff, which is heavy, not the tech/modern plastic/fiberglass stock stuff, which is light, but the same method probably applies anyways}]), only to clean up the bore again after the chamber grease, dirt, and powder residue mess. WTF! It is probably more efficient to clear the entry/chamber and exit/muzzle first; then clean up the bore in one cycle.

As for the solvent and lubricant, I would probably wipe down the solvent to remove the molecular debris before applying the lubricant. This applies to the frame and parts concerned. Oh, if you ever need to do the trigger group, good luck on that one. I haven't been intricate enough to fiddle with its disassembly and reassembly. I did happened to fix back the hammer pin/strut and ejector pin mishap, but that's about it.

---

Oh, as a reminder, although it was not said in the general rulebook, "Guns should not be stored loaded or cocked!". I know that leaving the bolt in the cock position may buy some time in loading a cartridge into the chamber faster, but the spring tension will wear out over time like this, thus reducing its recoil power to assist in the load process. Plus, the bolt lock will wear down, giving away to the recoil as well. Cock n' lock, cock n' lock. Otherwise, the the lock and ready/action/charge/cock/bolt will damage/scrape the frame for a bit. For loading/unloading cartridges, it's just better to cock from the very start to finish. Leave the bolt uncocked for other situations.

I made such good progress (yes, call me a loser for a grain of a moment).
I'll look over my posts and try to make a summary based on my experiences.

_________________
_
https://www.youtube.com/watch?v=IoFD-c740Y0, Must be the_washington_times/moonie anthem
link <- this as well!
https://en.wikipedia.org/wiki/File:ChoSh.jpg, resident alien generation? Wow!
_
Regurgitator monster to be resumed
whatissk/moonie/washingtontimes=anti-armistice nazi instigator-usurper/tyherantno parasite/censorship/anti-neutrality embargo/siege fallen cheonson-ilminismist/ilminazmist/merciless 'they live' mein kampf machine/kal_flight_007 self-victimization
nsfw
Spoiler: show
Fraud Alert Renewal Month: 03, 06, 09, and 12
My ZDoom mods
Viva Le Resistance! (threat: see ☠Image☠ below...)
Metal tracking mods
sfw
Spoiler: show
https://archive.org/download/for_jihad_monsters/Lightning%20Exclusive%20Nasheed%20By%20Ahmad%20Al-Muqit.mp3


Sun Oct 18, 2020 5:54 pm
Profile WWW
Level 20
Level 20
User avatar

Cash on hand:
-1,297,212.95

Bank:
0.00
Posts: 2126
Joined: Sun Mar 19, 2017 6:11 am
Location: PEARL HARB☠R!!! QUELL (PRETENSE OF) INSTIGATIONS (WARMONGERING), USURPATION, AND COUPS!
Group: Registered users
Post Re: What is the NRA, as currently a Gun Use Rights Lobbyist?
I didn't write this up before, but I think it deserves its own post.

It's about the maintenance of cleaning supplies.

It's quite simple to soap and rinse, but when it comes to air drying, it's a different story.

Be it rags, brushes, or boresnakes? It's either a simple or essential cleaning tool, but they have to be cared for more throughly. When it's sunny or just daytime, and no dusty conditions, leave it out to dry. When there is a dusty condition or rainy/snowy times, take all your tools into a protecting shelter. Upon sunset, take your boresnakes back inside. The duration of air drying should last for about a week.

While it is much easier to disregard any of the tools, just remember that they all make surface contact with your goods. So a clean and proper slate to the tools will transfer to the goods as well. Healthy thinking, I say.

_________________
_
https://www.youtube.com/watch?v=IoFD-c740Y0, Must be the_washington_times/moonie anthem
link <- this as well!
https://en.wikipedia.org/wiki/File:ChoSh.jpg, resident alien generation? Wow!
_
Regurgitator monster to be resumed
whatissk/moonie/washingtontimes=anti-armistice nazi instigator-usurper/tyherantno parasite/censorship/anti-neutrality embargo/siege fallen cheonson-ilminismist/ilminazmist/merciless 'they live' mein kampf machine/kal_flight_007 self-victimization
nsfw
Spoiler: show
Fraud Alert Renewal Month: 03, 06, 09, and 12
My ZDoom mods
Viva Le Resistance! (threat: see ☠Image☠ below...)
Metal tracking mods
sfw
Spoiler: show
https://archive.org/download/for_jihad_monsters/Lightning%20Exclusive%20Nasheed%20By%20Ahmad%20Al-Muqit.mp3


Sat Oct 24, 2020 8:14 pm
Profile WWW
Level 20
Level 20
User avatar

Cash on hand:
-1,297,212.95

Bank:
0.00
Posts: 2126
Joined: Sun Mar 19, 2017 6:11 am
Location: PEARL HARB☠R!!! QUELL (PRETENSE OF) INSTIGATIONS (WARMONGERING), USURPATION, AND COUPS!
Group: Registered users
Post Re: What is the NRA, as currently a Gun Use Rights Lobbyist?
I'll get to the sighting in for some gentlemenly target fun. It is very important!

As for now, I forgotten about mentioning how to unload a mag. By the fixtures that holds the staying place of the mag, it is probably best to aim up and release the mag. The angle and gravity will enforce the mag release, dropping it out of the frame.

Of course, if you do rein in the good to your person to catch the mag, you are likely to instinctively aim up before releasing the mag.

_________________
_
https://www.youtube.com/watch?v=IoFD-c740Y0, Must be the_washington_times/moonie anthem
link <- this as well!
https://en.wikipedia.org/wiki/File:ChoSh.jpg, resident alien generation? Wow!
_
Regurgitator monster to be resumed
whatissk/moonie/washingtontimes=anti-armistice nazi instigator-usurper/tyherantno parasite/censorship/anti-neutrality embargo/siege fallen cheonson-ilminismist/ilminazmist/merciless 'they live' mein kampf machine/kal_flight_007 self-victimization
nsfw
Spoiler: show
Fraud Alert Renewal Month: 03, 06, 09, and 12
My ZDoom mods
Viva Le Resistance! (threat: see ☠Image☠ below...)
Metal tracking mods
sfw
Spoiler: show
https://archive.org/download/for_jihad_monsters/Lightning%20Exclusive%20Nasheed%20By%20Ahmad%20Al-Muqit.mp3


Sat Oct 31, 2020 2:48 pm
Profile WWW
Level 20
Level 20
User avatar

Cash on hand:
-1,297,212.95

Bank:
0.00
Posts: 2126
Joined: Sun Mar 19, 2017 6:11 am
Location: PEARL HARB☠R!!! QUELL (PRETENSE OF) INSTIGATIONS (WARMONGERING), USURPATION, AND COUPS!
Group: Registered users
Post Re: What is the NRA, as currently a Gun Use Rights Lobbyist?
This isn't a sighting by iron nor scope post just yet.

I read that there's some judgment to come over the assault weapons ban. I think I also remembered something about ar/ak pistols. That is akin to a machine pistol, which is strictly for military use. There's going to be a debate regarding gun rights versus mass shooting incidents.

---

Oh, and this is just something added in case I have to go back to it.

About the problems with glocks...
Spoiler: show
Okay, I will detail the problem with glocks. I will/may not list the context in the respective topic. I definitely cannot defend the context of risk and recklessness. This is because there's overwhelming numbers of argument to blacklist this device. No contest.

Glocks, according to police, do not have a true safety mechanism. So when some crazy bad dude (on crack or meth) goes out to reach for it, they just need to pull the trigger and a cop gets popped.

Glocks, like any other fucking machine, have parts. Unfortunately, there's a same matched frame compatibility design for different bullet diameters. So as long there's a purchase for the right parts, any pop you buy is the right price. When SHTF or there's a minor/major state of emergency, all these mutherfucking 'prepper' motherfuckers start buying all the fucking ammo, just because they can and they have the right parts to work with. What's left are the shotgun ammos, until glocks can fit those too! Fucking guilty man, fucking guilty.

Glocks, like the saturday night specials, are cheap in price, or at least used to be cheap in price. Parts of it are plastic, which can bypass metal detectors. In terms of manufacturing or assembly, I'm sure with enough effort and time, it can be done. Even without the price argument, there has been a sufficient historical study about the criminal usage of glocks; particularly loud on them mass murders. Basically, it's going to be like a saturday night special. Oh, there's a machine pistol version of the damn thing! Given the fact that there is a compatibility design, it could potentially be a off roster firearm. That's another rule yet to be broken. Quite frankly, I'm just surprised that them shooters didn't thought this through. All was needed was to give it time.

***
Basically, glocks can be all ammo eaters. Everyone can agree to that.
***

_________________
_
https://www.youtube.com/watch?v=IoFD-c740Y0, Must be the_washington_times/moonie anthem
link <- this as well!
https://en.wikipedia.org/wiki/File:ChoSh.jpg, resident alien generation? Wow!
_
Regurgitator monster to be resumed
whatissk/moonie/washingtontimes=anti-armistice nazi instigator-usurper/tyherantno parasite/censorship/anti-neutrality embargo/siege fallen cheonson-ilminismist/ilminazmist/merciless 'they live' mein kampf machine/kal_flight_007 self-victimization
nsfw
Spoiler: show
Fraud Alert Renewal Month: 03, 06, 09, and 12
My ZDoom mods
Viva Le Resistance! (threat: see ☠Image☠ below...)
Metal tracking mods
sfw
Spoiler: show
https://archive.org/download/for_jihad_monsters/Lightning%20Exclusive%20Nasheed%20By%20Ahmad%20Al-Muqit.mp3


Fri Nov 13, 2020 9:27 pm
Profile WWW
Level 20
Level 20
User avatar

Cash on hand:
-1,297,212.95

Bank:
0.00
Posts: 2126
Joined: Sun Mar 19, 2017 6:11 am
Location: PEARL HARB☠R!!! QUELL (PRETENSE OF) INSTIGATIONS (WARMONGERING), USURPATION, AND COUPS!
Group: Registered users
Post Re: What is the NRA, as currently a Gun Use Rights Lobbyist?
I am about to make some really personal arguments of personal defense carry weapons, but some bad some good either way.

I rather see some improvements in the design and ergonomics, than spoil over the matter of ethics in a arbitrary drug-laden world (there isn't any, safety or security at least).

First off, the revolver.

Well, one thing for sure, I see a lack of back sight in revolvers. This is a shame! Why not they do this? Accuracy a skewed! Could the hammer be the problem? It is blocking the damn view? It definitely blocks the foresight before being cocked! Would the back sight snag, like the hammer? Then, just redesign the sight with the smooth curves to slip. How about the hammer? At least give it a try!

_________________
_
https://www.youtube.com/watch?v=IoFD-c740Y0, Must be the_washington_times/moonie anthem
link <- this as well!
https://en.wikipedia.org/wiki/File:ChoSh.jpg, resident alien generation? Wow!
_
Regurgitator monster to be resumed
whatissk/moonie/washingtontimes=anti-armistice nazi instigator-usurper/tyherantno parasite/censorship/anti-neutrality embargo/siege fallen cheonson-ilminismist/ilminazmist/merciless 'they live' mein kampf machine/kal_flight_007 self-victimization
nsfw
Spoiler: show
Fraud Alert Renewal Month: 03, 06, 09, and 12
My ZDoom mods
Viva Le Resistance! (threat: see ☠Image☠ below...)
Metal tracking mods
sfw
Spoiler: show
https://archive.org/download/for_jihad_monsters/Lightning%20Exclusive%20Nasheed%20By%20Ahmad%20Al-Muqit.mp3


Sat Nov 14, 2020 2:52 pm
Profile WWW
Level 20
Level 20
User avatar

Cash on hand:
-1,297,212.95

Bank:
0.00
Posts: 2126
Joined: Sun Mar 19, 2017 6:11 am
Location: PEARL HARB☠R!!! QUELL (PRETENSE OF) INSTIGATIONS (WARMONGERING), USURPATION, AND COUPS!
Group: Registered users
Post Re: What is the NRA, as currently a Gun Use Rights Lobbyist?
I didn't really want to go to storage safety, but it's an eventually. I have to address the matter of a goods safe, eventually. Damn them meddling kids.

I personally don't like cable locks because they happened to interfere with the bore interior by intended design. Can you imagine the scraping of the steel cables within the barrel? Fuck! Even then, the ends can bang up either the muzzle or chamber interior. If you happened to wrap that string up elsewhere, it might be able to hold. Or at least partially. They are best used for goods with magazines and ejection ports (what else could they be useful for? I think that's about it.). Just make sure not to grate steel by steel. It's sensitive stuff.

Trigger locks? Ugh, it's not 100% preventive in trigger pull. Those locks are probably better installed behind the trigger, but it makes no sense if there's a risk to damage the trigger part.

The best lock I'll ever pick would be anything that emulates a FSDC® Speciality Lock-Out System. This system consists of a bracket and padlock, each component precisely measured for a certain good design. Its function is to basically block the bolt, magazine feed, and cartridge to make contact with the chamber. Its method is to interfere with the space of the ejection port. The bracket will not touch any sensitive moving parts. In addition, optional rubber coating can really help to prevent accidental damage to the good during the lock period. Now, some companies do issue out there own bracket and padlock. Some don't. Third party vendors can help pitch in, but they are not exactly good quality management, you see? If care isn't taken into consideration in the manufacturing and delivery, well shit! I just hope it is at least operational.

As for sidearms, I am sure that there is a system for them too. It will be easy for pistols as it already has a ejection port. Revolvers, on the other hand, including the fixed cylinder, have the goal to block the chamber access of both barrel and cylinder. I think that one single locked padlock will prevent the cylinder to chamber in with the barrel. If it didn't, here's my padlock + bracket idea. There should be a molded bracket (hopefully rubber coated) to wrap around the enclosed cylinder on both sides (one side if it's a swing-out design, or can only be swung out or removed on one side). If not possible, then a hinge of 2 brackets shall attempt to wrap the cylinder. The padlock (hopefully rubber coated in shackle and body) will be locking down the bracket(s). Remember that the focus should be covering the chamber, then holding that position in place. That, and it's just probably better to get a sidearm safe. I haven't decided which is better though. For safes, it's probably difficult to determine which safe of safes to prioritize. Anybody want to play shell game or jack-in-a-box? It's still a good idea to organize!

---

One thing I really have to look into is the matter of fact of damaging your goods in the process of safe and secure storage. Only should you fail in preventing unauthorized access, should the option of an empty victory to arise to the occasion.

As for goods safes, well, if you surely have too much, well, it's obvious you need to organize such wares! I can't say that them electronic locks will do any good. Maybe, batteries are required or something. Maybe, it's a step away. Maybe, some electrical surgery is all it takes. I mean, there's a embedded system chip somewhere and it's not a operating system. Anywhom, just make sure that the interior of the safe will do its utmost to protect from the rumble and jumble of a break attempt.

_________________
_
https://www.youtube.com/watch?v=IoFD-c740Y0, Must be the_washington_times/moonie anthem
link <- this as well!
https://en.wikipedia.org/wiki/File:ChoSh.jpg, resident alien generation? Wow!
_
Regurgitator monster to be resumed
whatissk/moonie/washingtontimes=anti-armistice nazi instigator-usurper/tyherantno parasite/censorship/anti-neutrality embargo/siege fallen cheonson-ilminismist/ilminazmist/merciless 'they live' mein kampf machine/kal_flight_007 self-victimization
nsfw
Spoiler: show
Fraud Alert Renewal Month: 03, 06, 09, and 12
My ZDoom mods
Viva Le Resistance! (threat: see ☠Image☠ below...)
Metal tracking mods
sfw
Spoiler: show
https://archive.org/download/for_jihad_monsters/Lightning%20Exclusive%20Nasheed%20By%20Ahmad%20Al-Muqit.mp3


Mon Nov 16, 2020 9:01 pm
Profile WWW
Level 20
Level 20
User avatar

Cash on hand:
-1,297,212.95

Bank:
0.00
Posts: 2126
Joined: Sun Mar 19, 2017 6:11 am
Location: PEARL HARB☠R!!! QUELL (PRETENSE OF) INSTIGATIONS (WARMONGERING), USURPATION, AND COUPS!
Group: Registered users
Post Re: What is the NRA, as currently a Gun Use Rights Lobbyist?
Damn, when they say about the right caliber size, they seriously mean it. Somewhere along the way, the wrong size gets stuck somewhere in the process! This goes for the dummy rounds too!!

I got a lesson in disassembly and reassembly. My back hurts, oh shit!

Still, it's quite the educational experience, you know, seeing the semantics of the mechanism, and shit like that. Don't forget to wash your fucking hands though.

_________________
_
https://www.youtube.com/watch?v=IoFD-c740Y0, Must be the_washington_times/moonie anthem
link <- this as well!
https://en.wikipedia.org/wiki/File:ChoSh.jpg, resident alien generation? Wow!
_
Regurgitator monster to be resumed
whatissk/moonie/washingtontimes=anti-armistice nazi instigator-usurper/tyherantno parasite/censorship/anti-neutrality embargo/siege fallen cheonson-ilminismist/ilminazmist/merciless 'they live' mein kampf machine/kal_flight_007 self-victimization
nsfw
Spoiler: show
Fraud Alert Renewal Month: 03, 06, 09, and 12
My ZDoom mods
Viva Le Resistance! (threat: see ☠Image☠ below...)
Metal tracking mods
sfw
Spoiler: show
https://archive.org/download/for_jihad_monsters/Lightning%20Exclusive%20Nasheed%20By%20Ahmad%20Al-Muqit.mp3


Sat Nov 21, 2020 1:01 am
Profile WWW
Level 39
Level 39
User avatar

Cash on hand:
2,187.55

Bank:
5,250.50
Posts: 21063
Joined: Sat Feb 14, 2009 11:44 pm
Group: Sysop
Post Re: What is the NRA, as currently a Gun Use Rights Lobbyist?
SHALL NOT BE INFRINGED! :DDDDDDDDD

_________________
Image
Yeap.

_________________
Click the icon to see the image in fullscreen mode  
1 pcs.
Click the icon to see the image in fullscreen mode  
4 pcs.


Sat Nov 21, 2020 5:04 am
Profile E-mail WWW
Level 20
Level 20
User avatar

Cash on hand:
-1,297,212.95

Bank:
0.00
Posts: 2126
Joined: Sun Mar 19, 2017 6:11 am
Location: PEARL HARB☠R!!! QUELL (PRETENSE OF) INSTIGATIONS (WARMONGERING), USURPATION, AND COUPS!
Group: Registered users
Post Re: What is the NRA, as currently a Gun Use Rights Lobbyist?
You betcha!

I would use dummy rounds (not those plasticy snap caps that they call it! [with exception to the metal material]) for safe dry firing. I mean, you can dry fire without the training rounds, but risk damaging the good.

Now, it's not like the range practice, but for sure, it can save some money, time, and freedoms/rights. Dummy rounds will wear down overtime in use. They are made out of aluminum.

Oh, I was also wondering if sandbags filled with sand (steel plate as backstop still required!) will make a good range target for a plenty of rounds? That will be another time/possibility, if ever.

---

Next time, I am probably going to argue about the types of carry weapons against myself.

_________________
_
https://www.youtube.com/watch?v=IoFD-c740Y0, Must be the_washington_times/moonie anthem
link <- this as well!
https://en.wikipedia.org/wiki/File:ChoSh.jpg, resident alien generation? Wow!
_
Regurgitator monster to be resumed
whatissk/moonie/washingtontimes=anti-armistice nazi instigator-usurper/tyherantno parasite/censorship/anti-neutrality embargo/siege fallen cheonson-ilminismist/ilminazmist/merciless 'they live' mein kampf machine/kal_flight_007 self-victimization
nsfw
Spoiler: show
Fraud Alert Renewal Month: 03, 06, 09, and 12
My ZDoom mods
Viva Le Resistance! (threat: see ☠Image☠ below...)
Metal tracking mods
sfw
Spoiler: show
https://archive.org/download/for_jihad_monsters/Lightning%20Exclusive%20Nasheed%20By%20Ahmad%20Al-Muqit.mp3


Sun Nov 22, 2020 1:12 am
Profile WWW
Level 20
Level 20
User avatar

Cash on hand:
-1,297,212.95

Bank:
0.00
Posts: 2126
Joined: Sun Mar 19, 2017 6:11 am
Location: PEARL HARB☠R!!! QUELL (PRETENSE OF) INSTIGATIONS (WARMONGERING), USURPATION, AND COUPS!
Group: Registered users
Post Re: What is the NRA, as currently a Gun Use Rights Lobbyist?
Okay, it's time to argue about sidearms. It might overlap other arguments.

The first argument is "revolvers verus pistols", then there will be sub-categories (such as different designs) and so on. The concerned designs in this argument is the main stock.

So what's the difference? The pros? The cons? The compromise?

+Revolvers
-Usually longer barrels
-Hammer to hit it off!
-Simple design
-Visible ammunition load, but limited ammo capacity
-Probably usually harder to load/unload
-Easy safety something

+Pistols
-n/a
-Rack/cock slide or something like that
-More complex design
-Non-visible ammunition load, but larger ammo capacity
-Probably usually easier to load/unload
-Tricky safety something

Okay, so first off, the barrel of most revolvers are usually longer than the pistol. What does that entail? Well, first off, you get a larger container to contain the gas pressure, thus boosting forth both possibly power shots and velocity. Kinda like a sniper. How about the pistol? Well, it's much shorter for the most part, but I guess the regular size is sufficient enough. This isn't the cowboys times, you know?

Hammer versus slides. Well, the hammer can be quite simply cocked by the armed hand (depending on how large is the revolver! lol). The slide might need to be racked with the unarmed hand, thus requiring two hands. Of course, the slide can automatically cock (cock slide, lol) by a magazine load. However, a disabled arm/hand may render the shooter too incapacitated to rack/cock the slide or reload. Yes, there is a possibility where the situation may give the opportunity to rack/cock the slide beforehand, but it's not intended to stay racked/cocked/charged for a prolonged period of time. Even so, double action revolvers have been around for quite a while. Actually, it has been around for a long time, just not that long ago. It's an issue regarding the functionality of the good in terms of just to fire or ready the damn thing. Yeah, sorry about that, the correct cock/rack/charge term is probably ready. Yeah, it's ready.
|
Oh, and one mo thing, hahaha! That bolt that gives the semi-auto that auto ammo load? It ejects the spent ammo out of the ejection port. While auto loading is good and all, that very ejection port emits the gas pressure produced by the spent ammo. That portion of the pressure is spent on loading another round, rather than being spent on power shot and velocity. Like the barrel sub-argument, the pistol will lose out more performance in certain fields. No, the revolver can emit gas pressure through the cracks, but probably much lesser.

Revolvers are simple in design, but that doesn't mean it's way off worse. It's probably more reliable! Remember that sensei saying, "Simple is best."? Like that, at times. Regardless, it's just probably more simpler to disassemble and resemble a good. Custom assembly is dependent on how adept in such workings.

In terms of ammo capacity, the cylinder can be visually seen so you would know, especially if you got a glow-in-the-dark spot seen from the back end of the roll. For pistols, it's hard to tell. Policemen may argue that you don't need that many of a round when it comes to a high intensity situation. One to a few shots (in probably a exchange of fire) and the encounter retreats. That context does apply to common sense, but may not hold too well in a drug-induced world. Well, anyways, people are just going to say to just bang, bang, bang, till you bang no more. But yeah, the pistol load is much larger, if you don't mind checking the per ratios, or don't care about the importance of goods.

In terms of loading and unloading, revolvers usually have it bad. The norm is to load one for each empty cylinder barrel. However, in history, there have been the option to change cylinders at a go. I wonder if there is still such an option and if there many been any improvements to it? For pistols, it's much easier. To unload by release and load by slot is as easy as 1, 2, and 3. However, during a quick draw situation, when the release is accidentally pressed, the mag will fall out, leaving one readied load at the best of situations.

Safety! Ah!
So the revolver probably have the simpler safety. It was some hammer movement, am I right? The pistol is the more modern in the safety. In a quick draw situation for revolvers, resuming the action is all that's needed. Of course, double action is somewhat a step faster. The only problem is whether to let the hammer or trigger to do the talking. The hammer (single action) can serve as the safety feature. To draw, aim, ready, and fire. Or was it draw, ready, aim, and fire? Maybe it was ready, draw, aim, and fire? Plenty of options to choose from (safe to risky)! People talk about the potential snag problem from carrying revolvers. Well, there's the option to go double action. However, I know for a fact, that the cowboys back in the day, used to have some kind of freaking barrel wire/pouch to prevent the hammer snagging under the belt line for open carry (I just hope there can be one for concealed carry or a modern improvement [like, attaching a belt/holster wire to the good?]). The trigger (double action w/||w/o external hammer) is the safety feature. The problem is that if you happened to pull too hard while drawing, you let off a round. Hell, you can shoot yourself in the leg! Accidents happen! In a quick draw situation for pistol, you have to unset/preset the safety. In the time when you unset, I'm not sure if one/two hand(s) are required. It's a extra step. So is readying the slide. Presetting the safety and pre-readying the slide will leave the option to pull the trigger, but you will be in the same situation as the double action. Oh, and there's always one more step to be aware of concerning pistol safety. I said it once, and I will say it again. Mag slip!
True safety lies in them safety devices, with safety in mind.
|
There's an extension of safety that I would like to address. Amid the power and struggle between the goods, the law sits and awaits to preside. Revolvers do have a bad rep concerning their saturday night specials in assassination station, so you know how it goes down. Pistols have a bad rep concerning their glocks being in mass shooting incidents, gangbanging slanging? What can I say? There's good blood, there's bad blood.

---

Oh, I forgot something.

TRICK SHOT!

_________________
_
https://www.youtube.com/watch?v=IoFD-c740Y0, Must be the_washington_times/moonie anthem
link <- this as well!
https://en.wikipedia.org/wiki/File:ChoSh.jpg, resident alien generation? Wow!
_
Regurgitator monster to be resumed
whatissk/moonie/washingtontimes=anti-armistice nazi instigator-usurper/tyherantno parasite/censorship/anti-neutrality embargo/siege fallen cheonson-ilminismist/ilminazmist/merciless 'they live' mein kampf machine/kal_flight_007 self-victimization
nsfw
Spoiler: show
Fraud Alert Renewal Month: 03, 06, 09, and 12
My ZDoom mods
Viva Le Resistance! (threat: see ☠Image☠ below...)
Metal tracking mods
sfw
Spoiler: show
https://archive.org/download/for_jihad_monsters/Lightning%20Exclusive%20Nasheed%20By%20Ahmad%20Al-Muqit.mp3


Sun Nov 22, 2020 4:51 pm
Profile WWW
Display posts from previous:  Sort by  
Reply to topic   [ 106 posts ]  Go to page Previous  1, 2, 3, 4, 5 ... 8  Next

Who is online

Users browsing this forum: No registered users and 53 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Mods Database :: Imprint :: Crawler Feeds :: Reset blocks
Designed by STSoftware for PTF.

Portal XL 5.0 ~ Premod 0.3 phpBB SEO